Monthly Archives: May 2016

CEO of Quick Heal – Success Story

Kalash Katkar, the man by itself, needs no introduction the founder and CEO of the multimillionaire company quick heal, had to face a lot of struggle and hardships before reaching this position.

Born in a Marathi family, Kailash spent his childhood in Pune, where his father used to work in a machine setter company. When Kailash was in high school, the family faced an economic crisis which forced him to leave studies and search for a job.

Kailash worked in Pune at a Radio and calculator repair shop for 1500 rupees per month. Since he had a love for technology, he learnt to fix all the modern office gadgets in a short while and worked there for the next five years.

In the year 1990, he decided to start his calculator repairing shop; He had a 100 sq ft shop on rent and invested his entire savings of 15000 rupees in the business.

Following the first year he made a profit of 45000, but even after this success, he couldn’t satisfy himself of what he had achieved. Perhaps, a desire to do something new told him, this was not the thing he always wanted to do in his life, so he quit his business and started learning about computers through attending small courses or reading books in the library.

He launched a new venture CAT computer services in 1993 starting from a small room. He used to do most of the hardware repairing over there, but a little experience and lack of any formal education regarding equipment made running the business to be increasingly difficult.

Although He didn’t lose hope and carried on doing his work after two months the business was a success, and two families had kept him for the maintenance of their computer systems and payment for Rs 2000 per month. Slowly and gradually the number of clients increased In number, very soon he got a contract for maintenance from the new India insurance company and a few months back he got the second contract.

The business had started to grow in June and the first year company’s turnover was one lakh rupees and by that time he had come to realise that the surge of computers was taking over. He started to collect more information related to computers and in the midst of which viruses have started to detriment the computers and the users were experiencing several problems.

He had the challenge to remove this issue and to help his customers, but at that time the only solution to the problem was to format the computer, but there was also a possibility of losing data if not stored anywhere. Internet was too getting famous, and the opportunity to virus intrusion was proving even more dangerous. His younger brother had been doing computer engineering from the University of Pune, on his saying he developed a basic model of an anti-virus software he named it quick heal.

Sanjay started giving more time on hardware shops. He would create viruses, and his brother would develop software to remove them and as a result, they gave all that they had into making antivirus software and quite a hardware repairing job. Last year quick heal had a revenue of 250 crore rupees. Quick heal now stands as a significant competitor against American antivirus companies such as Symantec and Mcafee.

Your Guide When Finding The Right Freelance Copywriter

Hiring a freelance copywriter is now very common for most business owners especially because these days, content can make or break your brand. However, the success of your content does not simply rely on the skills and competency of your writer alone. As a client, you have some homework to do that will help you find the right copywriter.

As a client, there are some things that you need to do in order to find the right copywriter for your brand or business. You need to provide the relevant information that your chosen copywriter needs to craft for the content you need. So before you hire any promising candidate for freelance content writing services, you should know what to do first.

Most experts suggest for clients to be clear about their brand identity. This is the first thing that should be done first. One of the most dangerous things for a brand is to use content that appears generic. This usually happens when you fail to define the tone, style, voice and values you want your brand to carry.

Before you contact a potential writer, take the time to prepare your brand guidelines. Discuss this as well as soon as the writer goes on board. Apply this to just about any professional you hire who will need to work on and with your content, such as an event presenter.

Additionally, you need to identify your objectives. Know that content should have a specific purpose. Maybe you need content to increase your sales for a particular product. Perhaps you’re seeking to increase your search engine rankings, or you’d like to polish a presentation for a client or a live event so you get the response you want from your intended audience. There are a lot of talented writers out there, no doubt about it. But it’s important to get not just any good writer, but rather someone who has skills that match your needs.

One way to do this is to think about the type of content that you need. Is it a regular article to post on your site, a press release to share with the media, or a voice-over text for an explainer video? For most contract jobs, it’s best to find a specialist for every particular project. But it’s rare but truly an advantage to find someone who can handle a host of content including articles, blogs, web copy, press releases, social media and app content, video scripts, case studies and reports

Finance Solutions For Companies Venturing In The Import Industry

Importing pertains to the process of bringing in goods or services from another country. They come from foreign countries and are usually brought in for resale. Many companies find this type of business quite attractive since the products or services from other countries are really affordable and they can be resold for a nice profit margin.

Although the process of importing and reselling goods seems like a simple concept, entrepreneurs who are considering starting this kind of business will have to overcome various hurdles. One of these is finding the right financing solution.

At present, there are various finance solutions or methods you can choose from. The most recommended one by finance experts are:

Factoring in accounts receivables.

Also known as asset-based loans, this method involves selling your credit accounts or accounts receivable to a bank, lending company, or other financing institution. Accounts receivables are usually sold at a discount, between 80-90% of the face value of your credit accounts. An advance payment will be given to you by the factoring company, about of 2-3%, for the accounts you would normally have to wait on for payment.

Purchase order financing.

This method has similarities with asset-based loans. The main difference with this financing solution is that you take your invoices or purchase orders and assign or sell them to a financing company. This company will then assume the risk and the task of billing and collecting. When the goods are produced, the financing company collects the payment from the customers, takes its cut of the proceeds, and pays you the profit. This option is highly recommended if your profit margin is high enough on the goods you are importing. Having a good and reliable supply chain and creditworthy customers are important factors to consider as well.

Inventory financing.

Although inventory financing is an expensive solution, it is still a highly effective way of financing an importing business. Under this method, you will have to use your present inventory to secure a loan that will permit you to buy the imported goods your customers want or need. Because of this, you can effectively increase your inventory without impacting your cash flow. However, with this option, it is crucial to make sure that you can service or repay your debt. Inventory financing comes in three types: blanket inventory lien, floor planning, and field warehousing. Choose the type that best meets your requirements.

This Is Why An Automated Medication Dispensing Machine Is So Famous

The main focus of pharmacists is to improve the safety of patients. They have been looking at a range of approaches and technologies to attain this goal. Automated medication dispensing machines — decentralized medication distribution systems that provide computer-controlled storage, dispensing, and tracking of medications — were introduced to make pharmacists more productive as well as improve patient safety. It allows pharmacists to stock up, manage, pack, cap and label prescription medications efficiently and securely. It can store and handle more than 300 medications, as well as the details of patients.

This software is now widely used in many pharmacies. Before the advent of these machines, the job was done by pharmacists manually. It was a time-consuming process as well as labour-intensive. They had to make the medicinal charts and stock up the inventory. There were delays in delivery and patients had to wait a long time to get their medication.

Now, automated medication dispensing machines can do these tedious tasks in a jiffy. There is also the advantage of increased safety, convenience, and inventory control of medications. They offer a safe medication distribution system. Since pharmacists have more time to tend to other things, their output has increased.

Another highlight is that it enables to fill prescriptions after hours and have them prepared for patients to retrieve the next morning. This is, indeed, a blessing for busy pharmacies.

Earlier, large quantities of floor stock were available in the operating rooms. There was sometimes over-stocking of inventory, missing or erroneous drug charges. Drug wastage was also common. For narcotics and other controlled drugs, pharmacists had to make complicated manual documentations. Automated medication dispensing machines improved efficiency and control of narcotics and other medications in the operating suite. Another medical feature is the ability to continuously monitor the usage of drugs. You get to access a wealth of data and constant feedback while using this software, which leads to better efficiency and optimization.

Finally, a lot of medicines go waste without automated medication dispensing machines. For instance, a pharmacist who draws 5 grams from a 12-gram vial has to throw away what’s left behind because it can’t be used again. On the other hand, automated medication dispensing machines are germ-free and enable to draw from the same vial twice. This results in reduced wastage and considerable long-term savings. That’s a huge savings as some drugs are really expensive. If you’re forced to throw away drugs, you’re literally talking about wasting a huge amount of money by the end of the year.

Pharmacy Automation Systems, the leading robotic prescription dispensing systems manufacturer offers affordable, stand-alone & space saving prescription filling robotics for pharmacies looking for help. Find software for pharmacy like Tech Mate, Versi Mate & Versi Fill II to fill more prescriptions in less time.

Taking A Look At Transducer Problems

Just like any other product, the transducer probes also develop problems that are brought about by many factors.

Common transducer problems

The common problems include:

Crack in the transducer housing: The housing can crack at any area. This problem comes about when you drop or hit the transducer.

Dried out lens: The transducer lenses are designed to be moist but it’s common for them to dry out when you use the wrong disinfection. When your lenses have dried out it means that you have washed them with fluids containing alcohol. To fix the problem you should apply the proper gel.

Hole in the lens: You will have a hole in the lens when the lens has been hit with another object or has dropped on the floor. A telltale sign that your lens has a hole is a hole in your images. It’s good to note that a hole in the lens can also be brought about by wear and tear of the wires. It’s also common to have the same results when the wires have been cut with a sharp object. Before you run into conclusions you should first inspect the cables and lenses.

Lines in the image: Images resulting from the transducer cable will have lines when the cable has been run over by a cart system thus causing wear and tear. It’s also common to have the same problem when the cable has been hit or exposed to pressure for a long time.

Taking care of the probes

To avoid the problems that come with the probes you should take good care of them. One of the things that you should do is to regularly inspect the probes. You should pay attention to the lens. For ideal results inspect the lens with a magnifying glass. All probes come with their recommendations for use and cleaning. For ideal results, you should follow these recommendations.

Experts recommend that you have the probes tested by a professional every six months. It’s also recommended that you have the unit tested when you identify a problem. Most of the transducer problems come about when people and vehicles ran over the cables. To protect them you should keep the cables off the floor. When you aren’t using the probes use probe holders to hold them in place.

Conclusion

Transducers are prone to a number of problems but with care, you can prevent them from happening. To reduce the instances of the probes developing problems you should buy high-quality probes from reputable stores.